Routing DIDs to External SIP Trunk
As of release version 2.15 it is possible to configure SIP Trunks to route inbound DID calls to an external SIP Trunk. In this scenario, the call will not be associated with Teams in any way.
Enable External Trunks for Reseller
When adding or editing a Reseller, do the following:
Assign the Trunk Service to the Reseller. Note that the External Trunks option is only displayed if the Trunk Service is assigned.
Enable the External Trunks capability by selecting the checkbox.
Submit the form.
.png?sv=2022-11-02&spr=https&st=2025-06-27T23%3A07%3A20Z&se=2025-06-27T23%3A18%3A20Z&sr=c&sp=r&sig=1kWBbIJIrh8MpGsNQ4Bfe4uSHTY4xHwpm0jtMh6z1o0%3D "image(553).png")
Enable External Trunks for Enterprise
When adding or editing an Enterprise, do the following:
Assign the Trunk Service to the Enterprise. Note that the Operator Connect option is only displayed if the Trunk Service is assigned.
Enable the External Trunks capability by selecting the checkbox.
Submit the form.
.png?sv=2022-11-02&spr=https&st=2025-06-27T23%3A07%3A20Z&se=2025-06-27T23%3A18%3A20Z&sr=c&sp=r&sig=1kWBbIJIrh8MpGsNQ4Bfe4uSHTY4xHwpm0jtMh6z1o0%3D "image(554).png")
Note: Although the Enterprise Admin Email ID is required by the form, there is no action required by the enterprise Global Administrator for Operator Connect. Therefore, any email address can be used. Similarly, the SBC Region is required by the form, but not needed for Operator Connect. Therefore, any region may be chosen.
Upload DIDs
Follow the instructions for uploading DIDs here being sure to specify "External Trunk" as the voice route Type in the appropriate column of the csv file.
Configure External Trunk
1. Find the uploaded DIDs in the Phone Number table, and click "Configure External Trunk".
2. Select the desired External Trunk values for the DID configuration:
Phone Number - The DID that you are configuring.
Reseller - The Reseller of the DID that you are configuring.
Enterprise - The Enterprise of the DID that you are configuring.
Trunk Profile - The SIP Trunk that will receive calls made to this DID. If needed review the instructions to create and manage a Trunk Profile here.
Inbound Calling Only: Note that the this configuration currently supports only inbound calls made to the DID and routed to the selected SIP Trunk profile. Calls originated from the SIP Trunk profile are to external numbers are not routable.